Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bian

Pages: [1] 2
1
Chronos User Discussion / Re: Post Chronos 2.1 clips here!
« on: October 06, 2020, 10:43:37 AM »
You are right - YT made a great job  ;)
All in all I am very satisfied because the clips was stored in .mp4 and there is some room for improfement with DNG or TIFF

2
Chronos User Discussion / Re: Post Chronos 2.1 clips here!
« on: October 06, 2020, 09:12:27 AM »
Water @ 1000fps

https://youtu.be/K-X1P76wVGw

Gain: 0 dB
Lens: Sigma 50-100
WB: 5600K
edited with Davinci Resolve 16


3
Chronos User Discussion / Re: One line of lighter pixels in saved video.
« on: September 26, 2020, 10:04:46 PM »
At my cameras this thin line happend if I change the resolution and forgot a black calibration. Or I using the exposure slider - then I have to make a black calibration too.

4
Chronos User Discussion / Re: Chronos 1.4 Footage Thread
« on: August 09, 2020, 10:00:17 PM »
Nice upscaling test! Ive been having great results with VEAI as well. I should have more up soon this week. Did you shoot DNG or MP4?

I shoot TIFF.
Did you work with DNG? So its necessary to convert it for VEAI, isn't it?

5
Chronos User Discussion / Re: Chronos 1.4 Footage Thread
« on: August 09, 2020, 06:14:24 AM »
One of my new test videos  - Bees recorded at 1500 to 5900fps



Upscaled at 1920x1080 with Topaz Video Enhance AI

6
Chronos User Discussion / Re: Post Chronos 2.1 clips here!
« on: August 01, 2020, 10:56:43 PM »
Shure, that a 14,8V V-mount akku will work? My 1.4 need at least 16V  ;)

7
Chronos User Discussion / Re: Selfmade sun hood
« on: July 09, 2020, 06:57:13 AM »
Is that a samsung T5 SSD on the back?

No - an internal SSD in a Multiport USB3.0 + eSATAp casing - my T5 doesn't work at the multiport connector....

8
Chronos User Discussion / Re: Selfmade sun hood
« on: July 09, 2020, 04:33:51 AM »
Looks super nice!
Btw what is the top plate /  you are using ? is it the:  SmallRig QR VersaFrame Half Cage (Middle) 2127
Like how it gives a little protection for the cables.
Trying to figure out how to rig my soon to arrive 2.1 HD
How are you finding it?
-- Kristian Kettner

Thank you!

I did several experiments with cages - this on is a Niceyrig https://www.amazon.de/gp/product/B07G982TPT/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 but I changed both plates at 180 degree to get the 15mm rod behind the camera and not in front because it will be difficult to reach the aperture ring.

At this picture you'll see my actual setup

9
Chronos User Discussion / Selfmade sun hood
« on: July 09, 2020, 01:41:33 AM »
Hello,

I tried to build a sun hood for my chronos  Its made from Kydex - a acrylic-polyvinyl chloride composite engineered for thermoforming fabrication.
Its fixed at the cameras right side with a 1/4" srew and at the left side with a litte "nose" in the green AUX/IO connector.


10
Software Dev / Re: Chronos V0.5.0 Full Release
« on: June 21, 2020, 07:11:38 AM »
so far I have run into three issues:
 - the "OK" button on the safely remove dialog can't be clicked (neither via the touchscreen, nor via click on the cogwheel)
 - I hear wierd noises (almost sounding like a fan) on the live video audio, even without  microphone being plugged in
 - I'm sofar unable to record audio is there a special microphone needed? I tried a regular PC Headset without any amplification.

Hm, I cant find a problem in this dialog - in both windows (storage and play) it works well.
And I am also not able to record audio with the build in mic - there is only a loud hum in the clip.
It works for the SD Cards, but not for eSATA on my camera. I did not test USB.

Aha ok - I only tested it with SD Cards  ;)

11
Software Dev / Re: Chronos V0.5.0 Full Release
« on: June 21, 2020, 05:19:50 AM »
so far I have run into three issues:
 - the "OK" button on the safely remove dialog can't be clicked (neither via the touchscreen, nor via click on the cogwheel)
 - I hear wierd noises (almost sounding like a fan) on the live video audio, even without  microphone being plugged in
 - I'm sofar unable to record audio is there a special microphone needed? I tried a regular PC Headset without any amplification.

Hm, I cant find a problem in this dialog - in both windows (storage and play) it works well.
And I am also not able to record audio with the build in mic - there is only a loud hum in the clip.

12
Software Dev / Re: Chronos V0.5.0 Full Release
« on: June 20, 2020, 07:50:27 AM »
A big thank you to the Chronos team.

Did some tests and the software works without problems. I like the new GUI it looks very well.
Only one point - some digits from the frame numbers/counter in the play-window are at high framerates out of the visible range.
Finaly an other question - is it possible to insert some new 16:9 resolution settings - for example 800x450, 576x322 and so on.

Thank you!

14
Chronos User Discussion / Re: Speed booster St Chronos 2.1
« on: June 16, 2020, 09:42:59 PM »
Hello, after a good talk with nikon1 I bulid my own MFT adaptor. for my 1.4. I used a 4mm aluminium plate and some parts from a MFT macro-ring. Over all costs around 35,- Euro.

It works realy well  ;D



15
Chronos User Discussion / Re: Speed booster St Chronos 2.1
« on: May 22, 2020, 02:19:44 AM »
Very interesting - is it possible to use such a speedbooster with my sigma/nikkor lenses in combination with a nikon photodiox adapter?

Pages: [1] 2