Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - patrickrebstock

Pages: [1] 2 3 ... 6
just tried three diffrent ones with no sucess,
i have used one of these to do my updates in the past
do you guys just put the extracted folder on the usb stick? camupdate folder?

Are you using the same usb stick that you had for previous updates? I have found that only out of the pile I own will work for updates even though they all work for backing up callibration and saving video.
ill try another i think its same one

i am having a problem with install
im on version 3 firmware
i can back up calibration data but then it says no software update found, tried ejecting and repluging lots of times
any ideas?

i could try and shoot some for you tomorrow,
i have shot alot but not any raw yet

Software Dev / Re: Updating the UI: Main Screen Edition
« on: August 08, 2018, 09:29:07 AM »
having the option to hide menus and settings and get full screen preview will be nice,
main problem when using chronos is the dim screen
i cant wait to use external monitor

Software Dev / Re: Software V0.3 RC1
« on: May 10, 2018, 09:39:06 AM »
Video of the wb maybe bug, after video I got a better wb off of the rocketbox of my car, but it is a bit rediculous
Loving everything but this should be improved as it seems to work worse than last version

Software Dev / Re: Improving the Jog Wheel, ideas.
« on: May 09, 2018, 10:20:19 PM »
test this afternoon
the shot is close focused accidentally
cant wait for more jog wheel functionality

Software Dev / Re: Software V0.3 RC1
« on: May 09, 2018, 10:16:32 PM »
test this afternoon of the new firmware
the shot is close focused

Software Dev / Re: Software V0.3 RC1
« on: May 09, 2018, 04:04:45 PM »
Hey David, im not sure if its just me but the WB seems harder to use, i keep trying it on a white sheet of paper and getting weird colors, where I had an easy time doing it this on the old firmware when it wasn't as bright this am,

on a separate note:
When do you think Setting the Whiteballence by Kelvin temperature will be available?  I would say this is my number one reason for getting failed shots, i can't find anything to white balance off of, or the lens focal length makes it impossible either fisheye lens or 800mm telephoto, i would love to just set the WB to 5500k and be done with it, I would guess about 60% of my shots suffer because of having to do a custom WB

Software Dev / Re: Software V0.3 RC1
« on: May 09, 2018, 02:47:09 PM »
can you do the segmented buffer with the auto save and record so you can shoot one clip and it will save half the buffer in the backround and then you can shoot the other half and then it saves? thinking for the water housing,
tested this am and so stoked for more jog wheel control and IQ improvements

using a 8-15mm canon with metabones xl speedbooster

Software Dev / Re: Software V0.3 RC1
« on: May 09, 2018, 02:41:13 PM »
im getting stuck in the backup calibration data please wait, its been several minutes and no buttons do anything, tried restarting several times and get the same?

Try a different flash drive, or maybe reformat your current one.
reformat worked

Software Dev / Re: Software V0.3 Beta - Updated Jan 4 2018
« on: April 07, 2018, 05:05:32 AM »
sounds good, yeah i like the colors to look real i can wait

Software Dev / Re: Software V0.3 Beta - Updated Jan 4 2018
« on: April 05, 2018, 12:47:44 PM »
After I finish writing the manual we'll release Release Candidate 1 for Beta 0.3. I'm on the fifth revision of the manual now, so... soon™! :D
is this where we will see the release?

Software Dev / Re: Updating the UI: Input Methods Edition
« on: April 05, 2018, 12:45:46 PM »
looks good, i think turning jog dial to tab between windows then a press to change value or activate function like WB, then you can jog to change value or if something like WB once completed it goes back to the twist to tab to another selection, This would still leave pressed in twist to change value faster like you said,
having a checkbox in setting page to turn it jog dial would solve all the people that don't want it.
I am so exited to get to use this, going to be awesome!

Software Dev / Re: Software V0.3 Beta - Updated Jan 4 2018
« on: March 17, 2018, 03:50:15 PM »
I'm writing the user manual now. I don't know how long it'll take, since I'm working off the old one atm. After that, we'll need to do some testing to make sure nothing's broken. Then we'll release the next beta. 8)

While I imagine the release will come fairly quickly, on the order of weeks as opposed to months, I don't actually know. The last release was before I started with Krontech, so I don't have a good idea what we actually need to do here.
Sounds good keep us up to date so I know when to test

Pages: [1] 2 3 ... 6