Author Topic: Power Supply  (Read 303 times)

Caspita

  • Newbie
  • *
  • Posts: 3
    • View Profile
Power Supply
« on: September 17, 2018, 11:18:30 AM »
Dear all,
Can somebody please post a picture or the details of the original power supply? I work in a laboratory where all the power supplies look the same and they fit the plug. A brand, or the voltage/current rating would be ideal. Thanks a lot! All the best
« Last Edit: September 17, 2018, 11:23:38 AM by Caspita »

BiduleOhm

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
Re: Power Supply
« Reply #1 on: September 17, 2018, 11:51:47 AM »
The original one is a 19 V 2.1 A PSU made by Delta, model ADP-40KD and is pretty small for its power (something like 3 * 4 * 10 cm).

But any power supply of 40 W or more and between 17 and 22 V with a 5.5/2.5 positive tip barrel jack (all info is from the camera's datasheet) is compatible.


Edit: it's this one: https://www.digikey.fr/product-detail/fr/delta-electronics/ADP-40KD-BBBM/1145-1139-ND/5250423 ;)

Caspita

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Power Supply
« Reply #2 on: September 18, 2018, 10:31:15 AM »
Thanks!! I found the original power supply in the lab.

Cornflakes

  • Krontech
  • Newbie
  • *****
  • Posts: 3
    • View Profile
Re: Power Supply
« Reply #3 on: November 27, 2018, 01:53:36 PM »
I know this is an old thread but for the future if anyone needs, you can find the same power supply that is shipped with the Chronos here:
https://www.digikey.ca/products/en?keywords=1145-1139-ND
Just be aware of the barrel size if you are ordering other than first party.