Author Topic: Can no longer do backfocus adjusment  (Read 360 times)


  • Newbie
  • *
  • Posts: 11
    • View Profile
Can no longer do backfocus adjusment
« on: November 18, 2018, 09:14:04 PM »
So I accidentally unscrewed the backfocus ring at bottom of camera when doing backfocus adjustment. I put it back in and was able to screw back in fine. But the problem is no matter how much I turn the CS ring, I canít achieve proper backfocus like before. This is with the Computar 12.5-7m 1.2. Any help would be great.


  • Krontech
  • Full Member
  • *****
  • Posts: 192
    • View Profile
Re: Can no longer do backfocus adjusment
« Reply #1 on: November 20, 2018, 07:38:04 PM »
Solved via email. In case anyone else has this problem, the solution was to loosen the backfocus lock screw to ensure that the brass rod had enough clearance to allow the CS ring to be screwed into the proper depth.