Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ivandan

Pages: 1 [2] 3
16
Chronos User Discussion / Re: Post Chronos 2.1 clips here!
« on: November 01, 2022, 05:39:06 PM »
coming soon  8)

17
Chronos User Discussion / Re: Is this normal quality for Chronos 2.1?
« on: September 10, 2022, 08:35:52 AM »
Quote from: dorjeerand on September 09, 2022, 01:46:22 AM
Hi all,

Would like to ask if this is a normal quality from the Chronos 2.1? New user here. This quality doesn't look fitting to a camera of this calibre. Have I done something incorrect? Black calibration was done with lens cap on. Thanks for advice.

Normal (for 1229x716)

18
Chronos User Discussion / Re: Post Chronos 2.1 clips here!
« on: September 01, 2022, 10:48:14 PM »
Quote from: Nikon1 on August 31, 2022, 01:57:56 PM
Damn, nice Production and some impressive Shots from the Chronos in there.
 It Shows that this wasnt shot in an Afternoon...

Give advice please!)
Where can I post a link to a video? We need maximum promotion. I would be very grateful. More people should know about this camera. And that they are NOT worse than phantom flex 4k

19
Chronos User Discussion / Re: Post Chronos 2.1 clips here!
« on: August 31, 2022, 11:40:36 AM »
Short action film  8)  Big project. 3 months of filming.
https://vimeo.com/745084986

20
Chronos User Discussion / Re: SmallRig Camera Cage
« on: August 17, 2022, 12:38:57 AM »
Quote from: Bian on August 15, 2022, 11:20:59 PM
Quote from: ivandan on August 15, 2022, 10:07:26 PM
Quote from: Bian on August 15, 2022, 03:41:45 AM
Hello,

I ordered the camera cage from SmallRig and its realy perfect with my Chronos 2.1. My second project was a new SSD cage. Originaly the cage is  for Atomos Ninja V and is attached with a nato rail clamp.
model brand name v-mount plate? 19.5v? please

This one:

https://www.globalmediapro.com/dp/A2HG93/Globalmediapro-VLP-U-V-Mount-to-DC-Multi-Voltage-Converter/

I can not buy this product because of the sanctions against russia.

21
Chronos User Discussion / Re: SmallRig Camera Cage
« on: August 15, 2022, 10:07:26 PM »
Quote from: Bian on August 15, 2022, 03:41:45 AM
Hello,

I ordered the camera cage from SmallRig and its realy perfect with my Chronos 2.1. My second project was a new SSD cage. Originaly the cage is  for Atomos Ninja V and is attached with a nato rail clamp.
model brand name v-mount plate? 19.5v? please

22
Chronos User Discussion / Recommended fastest SSD (1-2tb) for Chronos HD2.1
« on: August 14, 2022, 02:54:05 AM »
Hi!
Please! Recommended maximum fastest SSD (1-2tb) for Chronos HD2.1
My max speed 15-20 mb/s (Plextor [old] 256gb)
Is it possible to increase the speed of saving DNG raw files? How much?

23
Chronos User Discussion / Re: Best (fastest) studio config in client + agency setup
« on: August 14, 2022, 02:46:08 AM »
Is there a result of the maximum speed of saving files DNG? How was it achieved?
ssd brand model? my max speed 15-20 mb/s

24
Chronos User Discussion / Re: Power supply v-mount d-tap compatibility issue Chronos 2.1 (sony fx6/fx9)
« on: August 14, 2022, 02:39:31 AM »
I solved my problem!  8)

25
Chronos User Discussion / Re: Hello, My name is Timur Civan, a table top director/DP - I have Questions.....
« on: August 14, 2022, 02:38:14 AM »
Quote from: TCivan on August 11, 2022, 04:47:36 PM
I am very interested in chronos 2.1 camera. I really want to give it a run and see if its the right tool for the job for me. 

Are any of you in Los Angeles? May i rent it for a day or two? Or would someone want to shoot a test with me?  I know i can probably find one at a rental house, but i really want to talk a bit with an owner, and someone who can show me how it really works.

please reach out, timurcivan @gmail.com

Obviously i will pay a rental fee for the camera for the day.  Name a price.

My work so you know what kind of stuff I do: https://www.wschupfer.com/artists/timur-civan-cinematography

Thank you!

По русски актуально общение?

26
Chronos User Discussion / Re: Help! Clean camera sensor (ir filter)
« on: August 07, 2022, 02:36:28 AM »
I would be glad for any information, video and links to the product that the matrix was ​​cleaned. And also a link to the glass ir filter

27
Chronos User Discussion / Help! Clean camera sensor (ir filter)
« on: August 06, 2022, 01:56:48 AM »
Safe way to clean the camera sensor?
I read that it is impossible to clean the IR filter with conventional means.

28
Chronos User Discussion / Re: Power supply v-mount d-tap compatibility issue Chronos 2.1 (panasonic fx6/fx9)
« on: June 28, 2022, 01:02:55 AM »
Quote from: Nikon1 on June 14, 2022, 07:22:02 PM
Just figured out, that its actually a Sony Camera, this Adapter is for, there is no Panasonic FX 6 or 9...
 Thats why i found nothing at all, but even when looking for the Sony, i just cant figure out any actually official Information regards Polarity.
 The Documentation on that is just Exceptionally bad, not only for all the Third-Party Power Supplies and Adapter Cables, but also from Sony itself.
 Needed to actually look on YT in hope of Finding some Video that would hopefully show some Angle of the Camera with high enough Resolution to be able to read the Polarity off that Cover for the Power Supply Connector there.
 Looks like Positive Tip to me, Screenshot Attached.
 https://youtu.be/PJ3WNiP1B5k?t=721
 .
 Not only that there is never any Info about the Polarity, apart from on that Cover Plastic, i also couldnt find anything confirming its actually the Same Size as the 5,5/2.5mm Barrel jack as the Chronos.
 Polarity should be Correct based on that Screenshot.
 .
 Can you take a Image of the Barrel Jack of the Adapter Cable and the Original Power Brick / Wall Power Supply that came With the Chronos right next to each other, with the hole of the Barrel Jack facing the Camera, to see if the Size is the Same?

manufacturer's official response

29
Chronos User Discussion / Re: Power supply v-mount d-tap compatibility issue Chronos 2.1 (panasonic fx6/fx9)
« on: June 16, 2022, 07:56:00 AM »
Quote from: Nikon1 on June 14, 2022, 07:22:02 PM
Just figured out, that its actually a Sony Camera, this Adapter is for, there is no Panasonic FX 6 or 9...
 Thats why i found nothing at all, but even when looking for the Sony, i just cant figure out any actually official Information regards Polarity.
 The Documentation on that is just Exceptionally bad, not only for all the Third-Party Power Supplies and Adapter Cables, but also from Sony itself.
 Needed to actually look on YT in hope of Finding some Video that would hopefully show some Angle of the Camera with high enough Resolution to be able to read the Polarity off that Cover for the Power Supply Connector there.
 Looks like Positive Tip to me, Screenshot Attached.
 https://youtu.be/PJ3WNiP1B5k?t=721
 .
 Not only that there is never any Info about the Polarity, apart from on that Cover Plastic, i also couldnt find anything confirming its actually the Same Size as the 5,5/2.5mm Barrel jack as the Chronos.
 Polarity should be Correct based on that Screenshot.
 .
 Can you take a Image of the Barrel Jack of the Adapter Cable and the Original Power Brick / Wall Power Supply that came With the Chronos right next to each other, with the hole of the Barrel Jack facing the Camera, to see if the Size is the Same?

https://www.topteks.com/sony-fx9-ac-adapter-60w
https://idxtek.com/products/a-dcfx9

sony/panasonic - oops :D


30
Chronos User Discussion / Re: Power supply v-mount d-tap compatibility issue Chronos 2.1 (panasonic fx6/fx9)
« on: June 14, 2022, 06:28:37 PM »
Can the camera Chronos 2.1-HD power receiver handle 3A current? panasonic fx9 19.5v 40-60w 3A
Original camera Chronos 2.1-HD power supply 19v 45w 2.1A
Is it possible to check amps (current 2.1A → 3A)?
https://aliexpress.ru/item/4001332664321.html


Pages: 1 [2] 3