KronTalk

Chronos => Chronos User Discussion => Topic started by: OAssal on June 02, 2022, 05:18:40 PM

Title: Camera not updating
Post by: OAssal on June 02, 2022, 05:18:40 PM

I followed al of the instructions on the Chronos manual to update the software but there is no difference afterwards. I started with V0.3.1 and tried updating to v0.7.1. But after I installed the file to my SD card, and placed it back into the camera, it still reads V0.3.1.

Can anyone help me with this issue?

Title: Re: Camera not updating
Post by: Nikon1 on June 02, 2022, 07:43:54 PM

Can you confirm, that you installed the File to a Micro-SD-Card, which was then Placed into the Bottom Slot for System SD-Cards as seen in the Manual on Page 42?:
 https://www.krontech.ca/wp-content/uploads/2021/09/RE-PDEV-10009-Chronos-User-Manual-Full-Software-Version-0.7.0.pdf
 The Full-Size SD-Card Slot on the Top of the Camera, that is very obvious to see, is for Saving Footage only, placing a Card with any kind of Software into that Slot will do nothing. So make sure to always replace / update the Lower System SD-Card.

Title: Re: Camera not updating
Post by: OAssal on June 03, 2022, 03:17:02 PM

Yes, thank you Nikon1, I was uploading to the wrong SD card. I now uploaded to the correct micro-SD and the camera has updated. Thank you for your help.