Recent Posts

Pages: 1 ... 6 7 [8] 9 10
71
Chronos User Discussion / Re: Exposure time setting.
« Last post by wilkinsonwilfrid on January 01, 2024, 08:52:05 PM »
I suppose I'll attempt to address my own question.  Get enough light to record video with the fewest microseconds of exposure feasible.  Your frame photographs will exhibit greater motion blur if you increase the exposure time.
72
Chronos User Discussion / Re: Sigma lens less price to alternate Sigma 24-70mm f/2.8 Nikon F zoom lens
« Last post by carterodell on January 01, 2024, 08:49:04 PM »
An excellent all-around lens for the Chronos 2.1 HD camera is the Tamron SP 24-70mm f/2.8 Di VC USD G2. It has great picture quality, is quick, and sharp. For steadier shots with slower shutter speeds, the vibration compensation is a lifesaver.
73
Chronos User Discussion / Re: Chronos 1.4 and 2.1 lowering bit depth to increase frame rates?
« Last post by B.H.V on December 29, 2023, 07:58:41 AM »
Quote from: Ronaldenson on December 28, 2023, 10:49:51 PM
Lower bit depth data must be physically recordable by the cameras' sensors. In the event that the sensors are only meant for 12-bit capture, it could be challenging to achieve lower bit depths using firmware alone.

Yeah true.
74
Chronos User Discussion / Re: Chronos 1.4 IR Filter Dimension Size Confusion?
« Last post by B.H.V on December 27, 2023, 08:00:58 AM »
Quote from: paulsmith6193 on December 27, 2023, 07:55:43 AM
yes the answer you have writes is perfectly fine

Not really, because this shows the 2019 revision has it at 18mm and 18mm but the 2020 revision as 15mm X 15mm which would not make sense.
75
Chronos User Discussion / Re: NEW: Chronos 4K12 and Chronos Q12
« Last post by paulsmith6193 on December 27, 2023, 07:57:27 AM »
hi you are right
76
Chronos User Discussion / Re: Chronos 1.4 IR Filter Dimension Size Confusion?
« Last post by paulsmith6193 on December 27, 2023, 07:55:43 AM »
yes the answer you have writes is perfectly fine
77
Chronos User Discussion / Chronos 1.4 IR Filter Dimension Size Confusion?
« Last post by B.H.V on December 27, 2023, 07:17:07 AM »
Hi all, I'm seeing different dimensions for the IR filter size (See below links). Some documentation shows it as 15mm X 15mm, another shows it at 18mm X 18mm and 24mm X 16mm. What would the filter size be for a Chronos 1.4 received in 2018?

https://www.krontech.ca/wp-content/uploads/2020/01/IR-Filter-.pdf

https://www.krontech.ca/wp-content/uploads/2019/03/FM-ENGR-50001-Chronos-1.4-Datasheet-Rv4-1.pdf

https://www.krontech.ca/wp-content/uploads/2021/09/FM-ENGR-50001-Chronos-1.4-Datasheet-Rev5.pdf
78
Chronos User Discussion / Re: NEW: Chronos 4K12 and Chronos Q12
« Last post by B.H.V on December 25, 2023, 08:58:07 AM »
Quote from: Ronald on December 25, 2023, 08:43:16 AM
Hi
Is the square sensor of the Q12 made for all the 9-16 format requests that we get all the time?

www.ronaldkoetzier.com

You should have more flexibility for cropping to 9:16 when using the Q12 because of it's squarish sensor.
79
Chronos User Discussion / Re: NEW: Chronos 4K12 and Chronos Q12
« Last post by Ronald on December 25, 2023, 08:43:16 AM »
Hi
Is the square sensor of the Q12 made for all the 9-16 format requests that we get all the time?

www.ronaldkoetzier.com

80
Chronos User Discussion / Re: 100,000 FPS with the 2.1 as previously advertised
« Last post by B.H.V on December 22, 2023, 05:33:15 AM »
What's the resolution to get to around 40,000 fps with the 2.1?
Pages: 1 ... 6 7 [8] 9 10