I've done s simple set of functions to load and view images recorded at the camera in LabVIEW (2019 or above)
Load and run TestImageView.vi (top level) to interactively display frames captured by color Chronos cameras.
Implementation remarksThe functions have been written to allow image preview within a LabVIEW application.
At the moment Bayer pattern processing is done in a very simple way.
I expect a lot of speed improvement is possible optimizing for file format.
Color mangagement will require further improvements. All types of RAW files show some color mismatch. View ColorCompare.png to compare.
General notesFunctions are provided "as is". Feel free to use, modify and include in your own project.
Testing has been done with a Chronos 2.1 color camera.
If you find errors with other model(s), let me know.
You can send notes or ideas to improve to
[email protected].
As the camera is part of a larger project and finally goes to the end user I might not be able to give support afterwards.
File format specific instructions- TIFF 8 Bit
no post processing required
- DNG, TIFF RAW
use ColorMatrix, Clip, Gamma, adjust gain to max about 1.0
- RAW12 and RAW16
set imageWidth, imageHeight and BitsPerSample
select individual frame: set StripOffsets to frame number
use ColorMatrix, Clip, Gamma, adjust gain to max about 1.0