KronTalk

Chronos => Chronos User Discussion => Topic started by: tesla500 on August 14, 2017, 10:43:33 PM

Title: Full user manual is out
Post by: tesla500 on August 14, 2017, 10:43:33 PM
The full user manual for software V0.2 is now out, go find it at the resources page (http://www.krontech.ca/resources.html)

As always, comments/suggestions are appreciated.

David
Title: Re: Full user manual is out
Post by: BiduleOhm on August 15, 2017, 04:01:19 AM
Very nice manual, I love the "Do not expose the camera to molten metal." part ;D

I wonder about one thing: as far as I understand the black cal for a given resolution, framerate, etc... is saved and if later you use the same settings it's not necessary to redo a black cal. If that's the case then is there an indicator somewhere to tell you if a black has been done in the past, or if not and you should do one?
Title: Re: Full user manual is out
Post by: Electra on August 16, 2017, 07:30:14 AM
Mechanical drawings! Yes!  Expect laser cut splash shield designs and dust covers in the next few days.
(Was planing this anyway, but now it makes things trivial.)
Title: Re: Full user manual is out
Post by: PaulBryanTV on August 16, 2017, 09:22:48 AM
Mechanical drawings! Yes!  Expect laser cut splash shield designs and dust covers in the next few days.
(Was planing this anyway, but now it makes things trivial.)

This could be helpful for my channel and upcoming videos.
Explosions + Dust + Vapor = Bad for poor Chronos.
DM me? :)
Title: Re: Full user manual is out
Post by: John Delonghi on August 16, 2017, 09:29:02 AM
Mechanical drawings! Yes!  Expect laser cut splash shield designs and dust covers in the next few days.
(Was planing this anyway, but now it makes things trivial.)

I could be interested as well...