KronTalk

Chronos => Chronos User Discussion => Topic started by: JeffNickel on August 15, 2022, 03:41:54 PM

Title: What is sample rate of TRIG2 INPUT?
Post by: JeffNickel on August 15, 2022, 03:41:54 PM
Hello,
Trying to sync 3 Chronos cameras but if I use the Frame Sync Output to trigger the camera the live image gets scrambled and freezes the camera.

I therefore have to trigger the cameras in parallel and want to know the sample rate of the Trig2 input ports to know if the frames will not start close enough together as I will be using the three videos to calculate velocities.

Regards,
Jeff
Title: Re: What is sample rate of TRIG2 INPUT?
Post by: horaortiz on September 27, 2023, 10:01:57 PM
Hello,
Trying to sync 3 Chronos cameras but if I use the Frame Sync Output to trigger the camera the live image gets scrambled and freezes the camera. mini crossword (https://minicrossword.io/)

I therefore have to trigger the cameras in parallel and want to know the sample rate of the Trig2 input ports to know if the frames will not start close enough together as I will be using the three videos to calculate velocities.

Regards,
Jeff

Verify the camera characteristics that may affect synchronization, such as frame rate, exposure, and so on, to ensure that all three cameras are set to the same values.