KronTalk

Chronos => Chronos User Discussion => Topic started by: Ben Viertlboeck on December 31, 2022, 04:30:49 AM

Title: Booting up Problem/ camera does not start properly
Post by: Ben Viertlboeck on December 31, 2022, 04:30:49 AM

Hello Chronos users,
I am a student  from Germany working with the Chronos 1.4 for a school project in physics.
I have used the camera yesterday and it worked perfectly fine, but today the camera simply does not boot up even though I tried several batteries and connected it with the AC cnverter.
When I start the camera there is only the Kron Technologie logo on the sceen. The softbuttons which are usually appearing on the right side do not appear.
Shutting down and switching on has not worked.
Thank you for your help
greetings

Title: Re: Booting up Problem/ camera does not start properly
Post by: Nikon1 on December 31, 2022, 04:57:37 AM

Maybe same Issue as here?:
 https://forum.krontech.ca/index.php?topic=806.0

Title: Re: Booting up Problem/ camera does not start properly
Post by: Ben Viertlboeck on December 31, 2022, 05:10:18 AM

I will give it a try.
Thank you so much