Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SergeyKashin

Pages: [1] 2 3 ... 6
1
Finally, one of the lighting projects is ready, 4 panel (200*300mm) - 1000 watt LED panel, size 1200 * 200mm


2
Chronos User Discussion / Re: Lens Mount for Chronos camera
« on: June 04, 2021, 02:55:16 AM »
I organize the idea as my own personal one, since I myself need an adapter, now it has become more clear at the price from the factory. I gathered about 10 people who want an adapter for themselves, now I will solve the issue with my paypal so that I can transfer for the adapter (since I did not use paypal before, I had restrictions on the amount). The photo shows the adapter for canon, as an example
Prices:
Sony - 180$/pcs
Nikon - 180$/pcs
Canon EF, Micro 4/3,Arri - 150$/pcs

3
Chronos User Discussion / Re: Review of Chronos 2.1
« on: May 20, 2021, 07:02:28 AM »
I have already contacted you many times, sent you photos and videos, but there is no answer to what I should do in this situation. This problem was on the old and new firmware

4
Chronos User Discussion / Re: Lens Mount for Chronos camera
« on: May 18, 2021, 02:29:41 PM »
Ready option

5
Chronos User Discussion / Re: Review of Chronos 2.1
« on: May 16, 2021, 02:28:58 PM »
Today, the camera hung up again after I connect the monitor (I tried different wires), I turned it on for 30-40 minutes to make everything work, this is not normal!!!
I tried to connect the monitor or turn it on in different sequences. But this is already overstepping the mark >:( >:( >:(

6
My cage ssd

7
Chronos User Discussion / Re: Lens Mount for Chronos camera
« on: May 10, 2021, 09:37:30 AM »
Some new photos

8
Chronos User Discussion / Lens Mount for Chronos camera
« on: May 05, 2021, 07:48:47 AM »
Hello everyone, I found a factory that makes adapters for the red camera, made them a request to make an adapter for our camera, they agreed on the condition that there will be a batch of 100 pieces in total, they can make for EOS-Chronos, M3/4-Chronos, AI-Chronos.
One of these days, they will redo the 3d model of red for chronos, all the information that will appear will be updated here. They can orient themselves on the price as soon as they make a 3D model (the more they do, the lower the price)

Also tell me what is your distance from the camera body to the adapter (example below in the photo) ?
Is this distance the same for all lenses? (which are given above)


Write messages below example:
1. kashin.sergey.v@gmail.com
2. EOS-Chronos, AI-Chronos

9
Chronos User Discussion / Replacing the screen with chronos
« on: May 03, 2021, 12:33:00 PM »
An idea appeared in my head to replace the chronos screen with a better one, because if the shooting is for a client he wants to see a good picture and it will become more convenient for himself to work.
Maybe someone watched which monitor model was there, maybe a foot noticed on the monitor from SmallHD or Atomos

10
see the aspect ratio of the image and frames in the camera settings

11
Chronos User Discussion / Re: Review of Chronos 2.1
« on: February 06, 2021, 01:34:37 AM »
how much did you pay for it, as you mentioned it was more expensive?Thanks.

I bought a cable for 15 dollars


12
Chronos User Discussion / Re: Review of Chronos 2.1
« on: February 05, 2021, 12:34:13 PM »
I was wrong my wire 30cm, Cable 30cm HDMI v2.0 for Smart TV 4K @ 60Hz cord
I have a cable from a Russian manufacturer

13
Chronos User Discussion / Re: Review of Chronos 2.1
« on: February 05, 2021, 09:59:55 AM »
I tried to replace the HDMI with a more expensive and shorter cable (15 cm) and it became much less freezes

14
Chronos User Discussion / Re: Create light for high-speed shooting 1500w
« on: January 29, 2021, 01:12:09 PM »
1. These LEDs have a very low color rendering index, so you will get a terrible picture on processing (unless of course this is an experiment in which Cree is not so important). I have a 1000-watt LED, its price is $ 85, but it has Cri80 and then I looked at what he got on installation and was shocked, it turned out to be a mess of colors and shades

2. The outlet has 60 hertz and these LEDs can strobe

3. If they have such a power of 1350 watts, then your radiator would heat up in less than a minute, take a wattmeter and measure how much LEDs consume, you will see that it will be about 500 watts, maybe even less

Now I am assembling LED panels in the size of 30x20 with a capacity of 250 watts. This panel heats up in about 1 minute to a very hot state and to reduce the temperature, I installed 2 coolers 140x140mm 1200 rpm there

15
Chronos User Discussion / Re: Create light for high-speed shooting 1500w
« on: January 16, 2021, 01:58:46 PM »
I already have 2 PWMs of 1000 watts and they work perfectly, although I can not yet turn them on at full power because I only do water cooling for the LED. Therefore, I am looking for a more powerful one so that 2 wires do not lead to the diode, but only 1 two-wire one. To do this, I want to find a pwm at 2000 watts 150 kHz with an operating range from 12 to 60 volts

In PWM there is such a transistor
http://ncepower.com/Upload/SGT/NCEP15T14Tdatasheet-15470517689.pdf


There is also such a power source that allows you to adjust the power immediately in it. LM 40-75ER -SORENSEN

Pages: [1] 2 3 ... 6