Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Gregory_87

Pages: [1]
1
Software Dev / Re: Chronos V0.6.0 Full Release
« on: April 01, 2021, 11:37:27 PM »
Hello,

I've updated my Chronos 1.4 cam from v.0.3.2 to the v.0.6.0. Now I have a problem because my 256 GB SD card is not detected by the camera. Card is formatted as FAT32 and was detected by the camera for previous firmware with no problem.  I've noticed that the same SD card connected to USB/SATA input through SD/USB adapter works fine. After detection as USB/eSATA input device, I've formatted the SD card using camera software. But after this the SD card is still not recognized when installed into the dedicated SD card slot in the camera. From USB/eSATA slot everything works fine.

2
Chronos User Discussion / Re: transfer video to computer via code
« on: February 17, 2020, 11:24:17 PM »
I've checked the script for win10 but I've obtained an error:

Traceback (most recent call last):
  File "get_latest_video_windows.py", line 7, in <module>
    cam = ParamikoMachine(host=host, user='root', password='', missing_host_policy=paramiko.AutoAddPolicy())
  File "C:\Users\NoName\AppData\Local\Programs\Python\Python38\lib\site-packages\plumbum\machines\paramiko_machine.py", line 264, in __init__
    self._client.connect(host, **kwargs)
  File "C:\Users\NoName\AppData\Local\Programs\Python\Python38\lib\site-packages\paramiko\client.py", line 368, in connect
    raise NoValidConnectionsError(errors)
paramiko.ssh_exception.NoValidConnectionsError: [Errno None] Unable to connect to port 22 on 192.168.12.1

I've disabled firewall but nothing changed. What should I do to run this script on windows 10?

3
Chronos User Discussion / Re: transfer video to computer via code
« on: February 12, 2020, 09:32:14 PM »
Thank you very much. I will check this.

4
Chronos User Discussion / Re: transfer video to computer via code
« on: February 11, 2020, 04:13:34 AM »
Hello,

I have two questions:

1. If the Chronos 1.4 should be connected to the PC via OTG USB or eSATA/USB socket mounted at the camera?

2. If the mentioned script allowing to download data from the camera to PC works under Windows? If not, is there any possibility to do the same task under Windows 10?


Pages: [1]