Author Topic: Post Chronos 2.1 clips here!  (Read 52496 times)

nik282000

  • Full Member
  • ***
  • Posts: 103
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #165 on: November 12, 2020, 10:04:54 PM »

CS223

  • Newbie
  • *
  • Posts: 37
  • 1.4 Color s/n 01266
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #166 on: November 13, 2020, 04:10:50 PM »
Nice stuff here!

Yet another free-fall-follow-focus clip.

Like Hans Gruber falling from Nakatomi Plaza.  ;D

clkdiv

  • Full Member
  • ***
  • Posts: 115
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #167 on: November 15, 2020, 04:05:54 AM »
Are you free-handing that?

No, that's not possible, imho. It's a stepper motor turning the focus wheel at the lens and another one moving the spoon.

Here are a few clips put together.

Hey Kristian, would you mind sharing your experiences and findings with light settings? It is really great what you are doing there, and I'd love to see what you use and how you setup things... :-)
« Last Edit: November 15, 2020, 08:48:58 AM by clkdiv »

clkdiv

  • Full Member
  • ***
  • Posts: 115
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #168 on: November 16, 2020, 08:24:34 AM »
The first professional approach with my highspeed follow focus and the Laowa probe at the Chronos: Click me

Visualtec

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #169 on: November 18, 2020, 12:53:19 PM »
My first proper video from the new camera, I think its going to be a steep learning curve! I'm finding it challenging but interesting just going through lenses to see which works best for me.

https://www.youtube.com/watch?v=9av9cbsWJS0&ab_channel=Josef1

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #170 on: November 19, 2020, 12:23:38 PM »
Not strictly 2.1 Footage, but the Startup-Animation of the 2.1 captured at 400fps/ 29fps Playback, just in case someone was also wondering what that Short little flash in the Middle there Was...

takashima

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #171 on: November 19, 2020, 03:34:08 PM »
Hello. I am a Japanese nature photographer. I got Chronos 2.1 last month and am enjoying high speed filming. I uploaded some videos to my channel on YouTube. ↓This is a playlist, shot with Chronos 2.1.

https://www.youtube.com/playlist?list=PLLCim2c4X09akemX7IDr_jFLzebWXsjtR

Please take a look. ↑ Sorry, only in Japanese.
« Last Edit: November 20, 2020, 01:33:11 PM by takashima »

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #172 on: November 27, 2020, 02:24:22 PM »
Finally got myself some propper LED-Lights and did a quick test with them today. 2142fps @146 ; 0dB analog 6dB digital Gain (Had set the Digital Gain to 6dB for a previous shot, and didnt double check again, cause i usually dont change that setting, so because of that, there is some faint noise there), f/16. Lens used was an 12,5mm f/1.3 Avenir.

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #173 on: November 27, 2020, 02:29:17 PM »
A image Quality test of my 0,64x Metabones i did a while ago, but just noticed i havent posted here, so i might as well share it. Lens used should have been an Nikon AF 70-300mm, but not too sure about that anymore.

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #174 on: November 27, 2020, 02:35:55 PM »
This Short bit of footage here is a bit of an crossover from that topic here:
 https://forum.krontech.ca/index.php?topic=614.0
 It is shot without the internal IR-/UV- Filter glass, which makes the Image somewhat more soft, but noticeable brighter in some situations. This was shot as kind of a test to push the Cameras to its limits on Low-Light. Shot at 46fps; 359; 18+6dB; f/0,95 50mm Schneider Kreuznach Lens wide open.

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #175 on: December 01, 2020, 01:36:34 AM »
Closeup of an Carbide Endmill cutting Aluminium, shot at 1000fps.
 6+6dB Gain, 180; f/16; Lens used was Schneider Kreuznach Xenon 50mm f/2 with an Stack of five 5mm Spacers to get it into focus.
 Lighting by 2x300W LED

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #176 on: December 01, 2020, 01:51:13 AM »
Carbide Insert Enmill, f/11 and 243, otherwise same settings as above. Sorry for all the Dirt on the Lens btw.

Visualtec

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #177 on: December 01, 2020, 12:25:52 PM »
Carbide Insert Enmill, f/11 and 243, otherwise same settings as above. Sorry for all the Dirt on the Lens btw.

That looks great !

chrissie_c

  • Newbie
  • *
  • Posts: 45
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #178 on: December 01, 2020, 01:07:48 PM »
Carbide Insert Enmill, f/11 and 243, otherwise same settings as above. Sorry for all the Dirt on the Lens btw.

This is very nice. and it's given me some ideas :)

Nikon1

  • Hero Member
  • *****
  • Posts: 683
    • View Profile
Re: Post Chronos 2.1 clips here!
« Reply #179 on: December 01, 2020, 01:11:28 PM »
@hydraulicpresschannel:
 https://www.youtube.com/watch?v=1Q8-awSFhXc
 https://www.youtube.com/watch?v=nedusgCUZC4
 .
 Well done, i think Gavin just redid your video idea, must be some Sort of Achivement ;)
 To be fair, not absolutely sure if he "stole" the idea, but seems pretty possible, or he actually has it from TicToc?