Chronos mounting holes

[Solscud007]

So I am slowly learning about the various accessories. Small Rig has some interesting accessories that bolt directly to the 1/4x20 holes like for mounting an external monitor etc. But I cannot seem to figure out what uses the smaller M4x0.7 holes.

What are you using those holes for?

[Nikon1]

https://forum.krontech.ca/index.php?topic=683.msg4717#msg4717
 https://forum.krontech.ca/index.php?topic=2.msg12#msg12
 https://forum.krontech.ca/index.php?topic=686.msg4656#msg4656
 https://forum.krontech.ca/index.php?topic=517.msg4289#msg4289
 https://forum.krontech.ca/index.php?topic=54.0
 https://forum.krontech.ca/index.php?topic=15.0
 https://forum.krontech.ca/index.php?topic=615.0
 https://forum.krontech.ca/index.php?topic=475.msg2765#msg2765
 https://forum.krontech.ca/index.php?topic=533.0
 https://forum.krontech.ca/index.php?topic=686.msg4835#msg4835
 .
 Above are a bunch of examples of what said smaller Holes have been used for in the past. They are basically mostly there, so you can mount whatever you want to the camera. Obviously a Cage would also allow for that, but if you just need a single mounting point or want to connect a MFT-Mount Adapter Plate to the camera, the Holes are nice to have. Makes the Camera very modular and customizable both for Industry and Home users. So you can use any of the Above Linked things to the Camera or you can come up with a use for them on your own.